Knowledge
Choosing a machine
Tank size, benchtop or industrial, lift or filtration, multi-tank lines: how to specify the right system for the parts you run.
18 articles
Choosing a machine · 8 min readUltrasonic tanks from 2 to 400 litres
Choosing a machine · 9 min readTank size for engine reconditioning: heads, blocks, cranksEngine parts cleaning tank size, worked through: baskets for car and truck heads, cranks and blocks, the height and load limits, and when a lift is needed.
Choosing a machine · 9 min readSTS or SX: which benchtop ultrasonic cleaner for a workshopSTS and SX are both heated benchtop cleaners with degas and sweep. The SX adds power steps, pulse, memory and IP54. How to choose for workshop parts.
Choosing a machine · 7 min readSizing a hot-air dryer for basket and cycle timeSize a hot-air dryer around the loaded basket, water carried from the rinse and required output. Compare DT sizes without assuming a drying time.
Choosing a machine · 7 min readReplacing solvent degreasing with aqueous ultrasonicsReplace solvent degreasing by assessing the complete wash, rinse and dry route: soil, material compatibility, bath control and checks on the part.
Choosing a machine · 7 min readInstalling an industrial ultrasonic tankPlan an industrial ultrasonic tank installation: delivery route, working space, power, water, used-bath collection, extraction and floor load.
Choosing a machine · 8 min readHot-air dryer or compressed-air blow-off?Compare compressed-air blow-off, a drip rack and a hot-air dryer through water retention, operator time, air use and the required handover.
Choosing a machine · 3 min readWhen to choose a lift systemA pneumatic lift raises and lowers the basket and, while the ultrasound runs, moves it up and down in the bath. It is the answer when the load is too heavy to hoist by hand, when parts shadow each other, or when the cycle has to be the same every time. The AL series from 75 to 2000 litres
Choosing a machine · 3 min readWhat we need to quote an ultrasonic cleaning systemSix answers let us size a tank, pick a frequency and quote without a week of e-mail: the part, the soil, the throughput, the supply, the space and the result you need. What each one changes in the machine, and what to send if you do not know yet.
Choosing a machine · 3 min readUMX Pro or ST series: two ways to build a 100-litre cleanerThe ST series is a floor tank with a separate generator cabinet; the UMX Pro is a cabinet with everything inside and a digital control panel. Same physics, different shop. Where each fits, with the overlapping models compared.
Choosing a machine · 3 min readTank material and wall thicknessOur tanks are AISI 304 stainless steel 2 to 3 mm
Choosing a machine · 4 min readST or SF: when the bath needs its own filtrationThe ST series is a heated ultrasonic tank; the SF series is the same tank built around a circulation loop with a buffer tank, oil skimmer and laminar flow. The second costs more and stands longer between bath changes. Where the line between them runs, with the overlapping models compared.
Choosing a machine · 3 min readSpray washer or ultrasonic bathA rotating spray washer throws hot detergent at the part from nozzles as the basket turns; an ultrasonic bath immerses it. One is fast on big, open parts with gross soil; the other reaches inside. The SPR series, what it is good at, and the lines that use both.
Choosing a machine · 3 min readMulti-tank lines: wash, rinse, dryWhen a clean part has to come out dry and residue-free, one tank is not enough. How a wash, rinse and dry line is laid out, how a transport carriage moves the basket through it, and how to decide the number of stations from the cleanliness you need.
Choosing a machine · 3 min readDryer tanks: the DT series after the wash and rinseA hot-air drying tank the same size as the wash tank, so the basket goes from one to the other without repacking. What the DT series does, how long a basket takes to dry, and when a dryer is worth its floor space.
Choosing a machine · 3 min readBenchtop or industrial: where the 30-litre line sits and whyBelow 30 litres
Choosing a machine · 2 min readOther types of industrial parts cleanersSpray-jet washers and dryer tanks next to the ultrasonic bath: what each one does, and when a line combines them.
Choosing a machine · 2 min readChoosing the right ultrasonic cleaner: size, material, power and controlSize, frequency, power, tank material, timer and temperature control, brand and price: seven points to check before you choose a machine for the parts you clean.