Topics
Articles about: Tank size
16 articles
Choosing a machine · 8 min readUltrasonic tanks from 2 to 400 litres
Parts and contaminants · 10 min readOne ultrasonic tank for the plant maintenance workshopPumps, valves, bearings and gears in one tank: size it from your largest regular part, choose frequency and cleaner, and know when filtration pays.
Choosing a machine · 9 min readTank size for engine reconditioning: heads, blocks, cranksEngine parts cleaning tank size, worked through: baskets for car and truck heads, cranks and blocks, the height and load limits, and when a lift is needed.
Choosing a machine · 9 min readSTS or SX: which benchtop ultrasonic cleaner for a workshopSTS and SX are both heated benchtop cleaners with degas and sweep. The SX adds power steps, pulse, memory and IP54. How to choose for workshop parts.
Choosing a machine · 7 min readSizing a hot-air dryer for basket and cycle timeSize a hot-air dryer around the loaded basket, water carried from the rinse and required output. Compare DT sizes without assuming a drying time.
Choosing a machine · 7 min readInstalling an industrial ultrasonic tankPlan an industrial ultrasonic tank installation: delivery route, working space, power, water, used-bath collection, extraction and floor load.
Parts and contaminants · 9 min readCleaning anilox rollers: tank, frequency and ceramic careHow to clean ceramic anilox rollers in an ultrasonic tank: sizing the tank to the roller, why 40 kHz, and the settings that protect the cells.
Choosing a machine · 3 min readWhen to choose a lift systemA pneumatic lift raises and lowers the basket and, while the ultrasound runs, moves it up and down in the bath. It is the answer when the load is too heavy to hoist by hand, when parts shadow each other, or when the cycle has to be the same every time. The AL series from 75 to 2000 litres
Choosing a machine · 3 min readWhat we need to quote an ultrasonic cleaning systemSix answers let us size a tank, pick a frequency and quote without a week of e-mail: the part, the soil, the throughput, the supply, the space and the result you need. What each one changes in the machine, and what to send if you do not know yet.
Choosing a machine · 3 min readUMX Pro or ST series: two ways to build a 100-litre cleanerThe ST series is a floor tank with a separate generator cabinet; the UMX Pro is a cabinet with everything inside and a digital control panel. Same physics, different shop. Where each fits, with the overlapping models compared.
Ultrasonic cleaning basics · 3 min readUltrasonic power density: watts per litre, and why big tanks need fewerDivide the ultrasonic power by the tank volume and you get the figure that predicts how hard a tank cleans. Our range runs from about 9 to 40 W per litre, and the spread is deliberate. How to read the number when comparing machines.
Choosing a machine · 3 min readTank material and wall thicknessOur tanks are AISI 304 stainless steel 2 to 3 mm
Choosing a machine · 4 min readST or SF: when the bath needs its own filtrationThe ST series is a heated ultrasonic tank; the SF series is the same tank built around a circulation loop with a buffer tank, oil skimmer and laminar flow. The second costs more and stands longer between bath changes. Where the line between them runs, with the overlapping models compared.
Process and parameters · 4 min readLoading the basket: shadowing, orientation and how much is too muchHalf of all "the machine does not clean" complaints are loading problems. How parts shadow each other, why blind holes go in tilted with the opening upward, what a basket load of 75 or 100 kg
Choosing a machine · 3 min readBenchtop or industrial: where the 30-litre line sits and whyBelow 30 litres
Choosing a machine · 2 min readChoosing the right ultrasonic cleaner: size, material, power and controlSize, frequency, power, tank material, timer and temperature control, brand and price: seven points to check before you choose a machine for the parts you clean.