Topics
Articles about: Degas
10 articles
Ultrasonic cleaning basics · 7 min readUltrasonic cleaning explained: cavitation, frequency, temperature and equipmentThe long version. How a sound field makes cavitation, what frequency, power and temperature change, how the cleaner fits in, what the generator, transducers and tank do, which functions matter, and which type of machine suits which work.
Choosing a machine · 9 min readSTS or SX: which benchtop ultrasonic cleaner for a workshopSTS and SX are both heated benchtop cleaners with degas and sweep. The SX adds power steps, pulse, memory and IP54. How to choose for workshop parts.
Operation and maintenance · 9 min readCommissioning a new ultrasonic tank: first fill to foil testThe first start-up of a new ultrasonic tank, in order: placing and connecting, first fill, timed heat-up, degassing, foil test and the day-one record.
Parts and contaminants · 4 min readCleaning threaded parts and blind holes with ultrasoundTapped holes, blind bores and internal threads trap chips, coolant and air. Why the trapped air is the real enemy, how part orientation, degassing and movement get the liquid in, which frequency suits fine threads, and how to get the liquid out again.
Ultrasonic cleaning basics · 3 min readCavitation: how a collapsing bubble cleans a surfaceUltrasound does not scrub. It makes millions of microscopic bubbles grow and collapse against the part every second, and the collapse does the work. What happens in the liquid, and what it means for the settings you choose.
Choosing a machine · 3 min readUMX Pro or ST series: two ways to build a 100-litre cleanerThe ST series is a floor tank with a separate generator cabinet; the UMX Pro is a cabinet with everything inside and a digital control panel. Same physics, different shop. Where each fits, with the overlapping models compared.
Operation and maintenance · 4 min readTroubleshooting: the machine runs but the parts are not cleanNine causes cover almost every case, and seven of them are the bath or the loading, not the machine. A checklist in the order that finds the fault fastest, from the sound of the tank to the generator display.
Operation and maintenance · 3 min readThe foil test: a one-minute check of cavitationA sheet of household aluminium foil in the bath for sixty seconds shows where the tank cleans and where it does not. How to run it, what the hole pattern means, and how to use it as the acceptance test for a new machine and the monthly check for an old one.
Ultrasonic cleaning basics · 3 min readSweep and degas: what the two buttons on a digital generator doSweep moves the frequency a little either side of nominal so no part sits in a dead spot; degas drives dissolved air out of a fresh bath so cavitation can start. When to use each, and what happens if you do not.
Ultrasonic cleaning basics · 2 min readAnalog or digital generator?The same transducers, driven two different ways. What changes in daily use, and which one to specify.