Topics
Articles about: Before coating
6 articles
Industries · 4 min readUltrasonic cleaning in industrial manufacturingParts off the machining centre, the press, the grinder and the heat-treatment furnace, cleaned before inspection, coating, assembly or shipping. What a manufacturing shop asks of a cleaning tank, the cleanliness specifications that drive it, and the set-ups from a single ST tank to an MT multi-tank line.
Process and parameters · 9 min readPrevent water spots and flash rust after washingWater spots and flash rust have different causes. Control rinse minerals, wet waiting time and humidity, then check drying and storage together.
Parts and contaminants · 4 min readCleaning parts before coating or painting with ultrasoundPaint, powder, plating and bonding fail on oil, fingerprints and residue. The cleaning sequence in front of a coating line, how to test that a surface is ready, the contaminants that cause craters and blisters, and how ultrasonic cleaning fits with conversion coatings and pretreatment.
Parts and contaminants · 3 min readUltrasonic cleaning of brake calipers for reuseBrake dust, road grime, old fluid and surface rust come off a stripped caliper in one cycle, without dry brushing or blasting the bores. What is removed before the bath, the settings for cast-iron and aluminium calipers, and the steps between the bath and a caliper that is safe to refit.
Process and parameters · 4 min readRinsing and drying after ultrasonic cleaningThe wash lifts the soil; the rinse takes the wash off the part; the dryer takes the rinse off. Skip either and the part carries a film of detergent, or water in every blind hole. How each stage is done, from a bucket to a DT dryer tank.
Parts and contaminants · 3 min readRemoving rust, scale and oxideUltrasound alone does not remove rust; the chemistry does, and the ultrasound makes it fast and complete. Which chemistries work on steel, aluminium, brass and copper, why they do not go in a standard tank, and how to protect the bare metal you have just exposed.