Stock offer until 31 DecemberIndustrial ultrasonic cleaners in stockSF-225 and SF-360 with filtration, 25% off the RRP.Prices excl. VAT and shipping · while stock lastsIn stock in the EU: delivery within Germany in 3–5 working days after receipt of payment, by freight to kerbside; to other EU countries on requestWhat do you clean?
Tank size finder
Which tank fits your part?
Find out in ten seconds.
Enter the size of one part and how many you want to clean at a time. We show the smallest models whose usable tank takes the load.
Uses the usable tank dimensions from our own spec tables.
Find your machineTank size finder
An indication, not a quotation: basket design, fixtures and soil all change the answer. An engineer confirms the size.
Find your starting point
A system for your scale.
Five families: benchtop, industrial ultrasonic, spray washing, drying and multi-tank lines.
01 / BENCHTOPBenchtop
2 to 30 litres
02 / INDUSTRIAL ULTRASONICIndustrial ultrasonic cleaners
Single-tank ultrasonic cleaners from 40 to 8000 litres
03 / SPRAY WASHERSSpray washers
Rotating-basket spray washers SPR-250/500/780 pump heated wash water through spray bars onto parts in a rotating basket, for parts too large or too heavy for immersion.
250–780 L
04 / DRYING TANKSDrying tanks
DT-96/206/300 drying tanks use hot air to dry parts after cleaning and rinsing.
96–300 L
05 / MULTI-TANK LINESMulti-tank lines
Manual, semi-automatic and automatic lines, built to your process.
- Manual line
- Semi-automatic line
- Automatic line
Industries
Industries we clean for
The same physics, a different part every time. Pick your sector to see which parts and which machines come up most.
From the bench to production
Explore the range.
Three starting points: a benchtop bath, an industrial tank and a lift system.

Benchtop
Sonixtek® SX series
For small parts on the bench, in the laboratory or at the service counter.
- 37 kHz
- Heating up to 80 °C
(176 °F) - Degas and sweep
3–28 L
(0.8–7.4 US gal) 
Industrial ultrasonic
ST industrial ultrasonic tanks
Industrial tanks for tools, engine parts and workshop maintenance.
- 28 or 40 kHz
- 10–100 °C
(50–212 °F) - External generator
40–400 L
(11–106 US gal) 
Industrial ultrasonic
AL ultrasonic cleaners with lift
A pneumatic lift for heavy baskets, with agitation during cleaning.
- 28 or 40 kHz
- 10–100 °C
(50–212 °F) - Pneumatic lift with agitation
75–2000 L
(20–528 US gal)
Start with the details
The right result starts with the right questions.
The component, the contamination and the next process all matter. We would rather ask than assume.
- Your parts and materials01
- Your cleaning requirements02
- Your production workflow03
A clear next step
From your component to a considered solution.
Understand the part.
Material, dimensions, contamination and the result you need.
Explore the process.
Tank format, handling, drying and your operating environment.
Define the next step.
A quotation, a cleaning trial, or a drawing to review.
Useful before we talk
A little detail goes a long way.
Bring your questions. These are good starting points for a conversation about your parts.
What should I have ready?
Part dimensions, material, what has to come off, how many parts per hour or per batch, and what happens to the part next. A photo or a drawing usually answers half the questions.
How do I choose a tank size?
Start from the basket, not the tank: the part has to sit with clearance on every side, and the batch has to fit without stacking parts on top of each other where the sound cannot reach. The usable tank dimension in our spec tables is the figure to measure against.
28 or 40 kHz?
28 kHz works harder and reaches heavier soil; 40 kHz is gentler and better on fine features and softer surfaces. Most industrial tanks can be supplied for either, and a sweep function keeps the field moving so the basket has no dead spots.
Become a distributor
Sell and service Sonixtek in your country
We are looking for distributors with their own service team. You get the full range from 2 to 8,000 litres










